(03) 9753 3214

Sliding Gates and Operators

Sliding Gates

Sliding gates are highly effective sort after types of automation where the installation of swing gates is not feasible for securing your home, industrial & commercial property. Gates range from pedestrian gates through to Entry / Exit gates up to 16 meters opening size.

Sliding Gate Manufacturing Material
  • Duragal Steel
  • Stainless Steel
  • Aluminium
  • Timber Infill Panels
  • All types of Architectural Materials.
Sliding Gate Finish
  • Duragal Finish
  • Powder Coat over Duragal
  • Hot Dip Galvanise
  • Hot Dip Galvanised including Powder Coat
  • 2-Pack Painted Finish
Sliding Gate Features
  • High Security
  • Architectural Design
  • Gate widths upto 15 metres
  • Trouble Free Operation
Sliding Gate Drive System
  • Drive motors range from:
    – 24 volt
    – 240 volt
    – 3-phase (only requiring single phase input)
  • Manual release in the event of power failure
  • Opening & Closing Speed from 200mm upto 950mm per second
  • All essential safety devices connected to gate operator
  • Control with purpose-built control board, or optional PLC board (Programmable Logic Control)
Sliding Gate Safety Devices Available
  • Loop Detectors
  • Photo Electric Beams (PE Beams)
  • Safety Sensitive Edges
Sliding Gate Options
  • Flashing light to notify gate operation
  • Battery Back up in the event of power failure
  • Integration with Access Control systems
  • Integration with Fire Alarm Control systems
  • Full Range of Locking Mechanisms
  • Signage
Sliding Gate Options
  • Flashing light to notify gate operation
  • Battery Back up in the event of power failure
  • Integration with Access Control systems
  • Integration with Fire Alarm Control systems
  • Full Range of Locking Mechanisms
  • Signage

Gate Automation Systems takes pride in training its staff to assist you in the decision making and advising of the correct sliding gate requirements & design parameters for your site along with the safety devices required for your specific application, along with the professional installation of the systems purchased.

Tousek Pull T Series

Tousek Pull 24T sliding gate operators, the 24T is the solution for automating small to medium sized sliding gates. Thanks to high levels of efficiency and safety it is suited for numerous applications, both in residential and apartment block settings. The series offers a 24volt D.C. model to be used for intense workloads and is idea where there are frequent power outages. The control boards are all latest-generation and fitted with all the indispensable commands for a complete system. Supported with a 3 Year Warranty

  • Pull 24 Series has been designed to operate gates from 400kg – 700kg.
  • Electronics automatically detect any lack of power & activate emergency mode, powered by back-up batteries (Optional Not Included).
  • Oil filled gearbox to ensure longevity of operating system.
  • Easy self-diagnosis of fault finding through top view control panel.
  • Idea for frequent opening residential & apartment applications.
  • Easy key lock release from outside.
  • Made in Austria.
  • Inclusions: 2 x Transmitters, 1 x Receiver Card, 1 x Antenna

    Tousek TPS 

    Tousek TPS 20 and TPS 20 PRO speed is an industrial grade 3 phase inverter controlled drive motor to handle any intensive application (only single phase input required). This is the solution for automating large sized sliding gates. Thanks to high levels of efficiency and safety it is suited to be used for intense workloads. The control boards are all latest-generation and fitted with all the indispensable commands for a complete system.

    Supported with a 5 Year Warranty

    • Utilising a commercial gearbox, laser cut 6mm zinc plated steel chassis, electronic controls and speed drive inverter.
    • Smooth, fully adjustable ramp up, ramp down in opening and closing phase.
    • Users an “Absolute Encoder” for precise gate movement.
    • TPS 20 designed to operate gates up to 2,000kg
    • TPS 20 PRO designed to operate gates up to 2,000kg
    • Opening speed of upto 350mm per second.
    • Power requirements are 240v single phase 15A.
    • Made in Austria.
    • 100% motor duty cycle resulting in operator can continually open and close.

      Gate Operating System

      Tousek TPS 40 PRO speed is an industrial grade 3 phase inverter controlled drive motor to handle any intensive application (only single phase input required). This is the solution for automating large and very large sized sliding gates. Thanks to high levels of efficiency and safety it is suited to be used for intense workloads. The control boards are all latest-generation and fitted with all the indispensable commands for a complete system.

      Supported with a 5 Year Warranty

      • Utilising a commercial gearbox, laser cut 6mm zinc plated steel chassis, electronic controls and speed drive inverter.
      • Smooth, fully adjustable ramp up, ramp down in opening and closing phase.
      • Users an “Absolute Encoder” for precise gate movement.
      • TPS 40 PRO designed to operate gates up to 4,000kg
      • Opening speed of upto 250mm per second.
      • Power requirements are 240v single phase 15A.
      • Made in Austria.
      • 80% motor duty cycle resulting in operator can continually open and close.

        Sliding Gate Operator: FAAC 720

        FAAC 720 sliding gate operator the solution for automating small sized sliding gates. Thanks to high levels of efficiency and safety it is suited for numerous applications, both in residential and apartment block settings. The series offers a 24volt D.C. model to be used for intense workloads and is idea where there are frequent power outages.

        Supported with a 2 Year Warranty

        • 720 Series has been designed to operate gates from 400kg.
        • Electronics automatically detect any lack of power & activate emergency mode, powered by back-up batteries (Optional Not Included).
        • Idea for frequent opening residential & apartment applications.
        • Easy key lock release through removable cover.
        • Inclusions: 2 x Transmitters, 1 x Receiver Card, 1 x Antenna

          Sliding Gate Operator: FAAC 721

          FAAC 721 sliding gate operator is the solution for automating medium sized sliding gates. Thanks to high levels of efficiency and safety it is suited for numerous applications, both in residential and apartment block settings. The series offers a 24volt D.C. model to be used for intense workloads and is idea where there are frequent power outages.

          Supported with a 2 Year Warranty

          • 721 Series has been designed to operate gates from 700kg.
          • Electronics automatically detect any lack of power & activate emergency mode, powered by back-up batteries (Optional Not Included).
          • Idea for frequent opening residential & apartment applications.
          • Easy key lock release through removable cover.

          Inclusions: 2 x Transmitters, 1 x Receiver Card, 1 x Antenna

            Sliding Gate Operator: Beninca Bull

            Beninca Bull sliding gate operators, the Bull is the solution for automating medium sized sliding gates. Thanks to high levels of efficiency and safety it is suited for numerous applications, both in residential and apartment block settings. The series offers a 24 volt D.C. model to be used for intense workloads and is idea where there are frequent power outages. The control boards are all latest-generation and fitted with all the indispensable commands for a complete system.

            Supported with a 2 Year Warranty

            • Beninca Bull Series has been designed to operate gates upto 1200kg.
            • Electronics automatically detect any lack of power & activate emergency mode, powered by back-up batteries (Optional Not Included).
            • Idea for frequent opening residential & apartment applications.
            • Easily accessible, built in electronic control panel with integrated radio receiver.
            • Easy key lock release through removable cover.
            • Internal provision for Photo Electric Cells.
            • Inclusions: 2 x Transmitters, 1 x Receiver Card, 1 x Antenna

              Beninca Bison

              Beninca Bison a industrial controlled drive motor to handle any intensive application (only single phase input required). This is the solution for automating medium sized sliding gates. Thanks to high levels of efficiency and safety it is suited to be used for intense workloads. The control boards are all latest-generation and fitted with all the indispensable commands for a complete system.

              Supported with a 2 Year Warranty

              • Utilising a commercial gearbox, laser cut 6mm zinc plated steel chassis, inbuilt limit switches, electronic controls and speed drive inverter.
              • Smooth, fully adjustable ramp up, ramp down in opening and closing phase.
              • Bison designed to operate gates up to 3500kg.
              • Opening speed of upto 300mm per second.
              • Power requirements are 240v single phase 10A.
              • 100% motor duty cycle resulting in operator can continually open and close.